================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...

Ext:  - Nested: 1 - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 3-6-2007, 15:19:58

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.02_11.00.00.01
Frame Date:       2007-05-10

    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
 Streamed out for 'StartSetupAppl': kill.exe
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release:                    K07.01.02.00_01.01.00.01
Version: 7.1
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: D

    Change Setup Language?
    Wanted: D, actual:  B
CA: _ADS_SetDirs  beginn
 set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  end


Begin  Comp_BeforeDataMove()

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    Allowable OS: Win2000
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

Deinstall Key: Comp_Def
StartAppl
 
    Shall start kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    ChangeDirectory to C:\WINDOWS\ for kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    Start Application: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe
start CreateProcess 
    Successfully started C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe s7otbxsx, Returnvalue: 0
 
    Shall start s7eptisx.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for s7eptisx.exe in C:\WINDOWS\System32\
    Could not find application s7eptisx.exe in C:\WINDOWS\System32\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
END  StartAppl
End  Comp_BeforeDataMove()


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\System32\s7onlinx.dll.ren" -> "C:\WINDOWS\System32\s7onlinx.dll"
    	Movefile
    	by-msi-copied (701.200.101.1) and new file (509.200.104.1) have a version: compare
    		by-msi-copied is newer version: move
    	try to move the file 'C:\WINDOWS\System32\s7onlinx.dll.ren' to 'C:\WINDOWS\System32\s7onlinx.dll
	MoveFile returned error 183
    	* Old: Shared Counter of 'C:\WINDOWS\System32\s7onlinx.dll.ren' before decreasing: 1
    	Reboot needed.
    	Windows NTx: write to PendingFileRenameOperations
	MoveFileEx: "C:\WINDOWS\System32\s7onlinx.dll.ren" ==> "C:\WINDOWS\System32\s7onlinx.dll"
    	Returned from AdsMoveFile
 CopyLockedFiles (RenameFilesAtReboot): end


WriteRegistryValues
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\MPI] "DescTextK" = "WinCC MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1k" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2k" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3k" = "User/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1j" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2j" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3j" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultJ" = "ISO
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextJ" = "ISO
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextJ" = "NDIS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\LogNames\MPI] "DescTextJ" = "WinCC MPI 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextJ" = "IE-PG
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultJ" = "IE-PG
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextJ" = "TCP/IP
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultJ" = "TCP/IP Protokoll (RFC-1006)
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextJ" = "NDIS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\S7ONLINE] "DescTextK" = "STEP 7 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1j" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2j" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3j" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1k" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2k" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3k" = "User/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\LogNames\S7ONLINE] "DescTextJ" = "STEP 7 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextJ" = "MPI 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultJ" = "MPI 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextJ" = "


StartApplAfter
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Service, Returnvalue: 0
 
    Shall start s7osuasx.exe in C:\Siemens\Common\S7SDD\
    ChangeDirectory to C:\Siemens\Common\S7SDD for s7osuasx.exe in C:\Siemens\Common\S7SDD\
    Start Application: C:\Siemens\Common\S7SDD\s7osuasx.exe
start CreateProcess 
================================================================================
[2007-03-06 15:20:20,078]
S7SDD Setup Application - Installation

Install S7SDD from C:\Siemens\Common\S7SDD to C:\WINDOWS\Inf\

	Attention: found old softbusdriver - driver splitted !
    Successfully started C:\Siemens\Common\S7SDD\s7osuasx.exe -i, Returnvalue: -1073741819
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Start, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 4
 
    Shall start sndeloem.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for sndeloem.exe in C:\WINDOWS\System32\
    Start Application: C:\WINDOWS\System32\sndeloem.exe
start CreateProcess 
    Successfully started C:\WINDOWS\System32\sndeloem.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for sntinstp.exe in C:\WINDOWS\System32\
    Start Application: C:\WINDOWS\System32\SNTINSTP.EXE
start CreateProcess 
    Successfully started C:\WINDOWS\System32\SNTINSTP.EXE -e Siem_ISOTrans, Returnvalue: 1
 
    Shall start sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    ChangeDirectory to C:\Siemens\Common\S7IEPG\CP1612 for sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    Start Application: C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for sntinstp.exe in C:\WINDOWS\System32\
    Start Application: C:\WINDOWS\System32\SNTINSTP.EXE
start CreateProcess 
    Successfully started C:\WINDOWS\System32\SNTINSTP.EXE -e s7snsrtx, Returnvalue: 1
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe
start CreateProcess 
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -service, Returnvalue: 0
 
    Shall start SC.EXE in C:\WINDOWS\System32\
    Start Application silent: C:\WINDOWS\System32\sc.exe
start CreateProcess 
    Successfully started C:\WINDOWS\System32\sc.exe config S7TraceServiceX start= auto, Returnvalue: 0
 
    Shall start NET.EXE in C:\WINDOWS\System32\
    Start Application silent: C:\WINDOWS\System32\net.exe
start CreateProcess 
    Successfully started C:\WINDOWS\System32\net.exe START S7TraceServiceX, Returnvalue: 0
 
END  StartApplAfter

    The INI-File forces reboot.

    Add Client:                     STEP7_{DF316006-FA84-40B0-B9B0-880B6487D5D7}
    Write Version:                  7.1
    Write Release:                  K07.01.02.00_01.01.00.01
    Display Name                    SIMATIC Device Drivers
    Logfilename                     C:\WINDOWS\S7DOS_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7DOS
    Write Restart:                  1
    Write Logfilename:              C:\WINDOWS\S7DOS_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 3-6-2007, 15:21:48 ;;;;;;
================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...
Installation skipped without starting Windows Installer: Only new client entries will be noted. OK.

Ext:  - Nested: 1 - Deinst: Pre
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 1-1-2007, 17:33:52

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.02_11.00.00.01
Frame Date:       2007-05-10

    --- Deinstallation--- !
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
 Streamed out for 'StartSetupAppl': kill.exe
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release:                    K07.01.02.00_01.01.00.01
Version: 7.1
No 'version.ini' file read because of Deinstall.
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: D

    Change Setup Language?
    Wanted: D, actual:  B
CA: _ADS_SetDirs  beginn
 set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  end

    TRACE: create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    TRACE: Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
CA: _ADS_UnRegisterFiles  begin

UnRegisterFiles:
CA: _ADS_UnRegisterFiles  end

    
    Uninstalling shared component...
    
    Property ADS_DEINST, read successfully: Pre
    Property ADS_CALLED_NESTED, read successfully: 1
    Now test Uninstall dependencies...

Main Path and Common Path determination:

Common directory
    Common Path exists: C:\Siemens\Common
    Common path not changed because already installed: D:\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    Property INSTALLDIR not changed because already installed: C:\Archivos de programa\
     
     
PreUIStartAppl
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Stop, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 1
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -UnRegServer, Returnvalue: 0
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe
start CreateProcess 
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -UnregServer, Returnvalue: 0
 
END  PreUIStartAppl
CA: _ADS_EraseDirs  begin
CA: _ADS_EraseDirs  end


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_REMOVED (action state) or INSTALLSTATE_ADVERTISED - Install state: INSTALLSTATE_LOCAL
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\System32\s7onlinx.dll.ren" -> "C:\WINDOWS\System32\s7onlinx.dll"
    	Movefile
       * WARNING: 	by-msi-copied file not found: C:\WINDOWS\System32\s7onlinx.dll.ren
    	Returned from AdsMoveFile
 CopyLockedFiles (RenameFilesAtReboot): end

    Increase Property 'ADS_WARNINGCOUNT': to 1
    Increase Property 'ADS_WARNING1COUNT': to 1
??? I_WARNING: Problems deleting own key: Software\Siemens\Shared Tools\S7DOS
    
    Uninstall finished normally.
    
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-1-2007, 17:34:12 ;;;;;;
================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...

Ext:  - Nested: 1 - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 1-1-2007, 17:34:19

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.02_11.00.00.01
Frame Date:       2007-05-10

    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
 Streamed out for 'StartSetupAppl': kill.exe
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release:                    K07.01.04.00_01.02.00.06
Version: 7.1
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: D

    Change Setup Language?
    Wanted: D, actual:  B
CA: _ADS_SetDirs  beginn
 set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  end


Begin  Comp_BeforeDataMove()

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 1
       NTProductType = 1
    Allowable OS: Win2000
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

Deinstall Key: Comp_Def
StartAppl
 
    Shall start kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    ChangeDirectory to C:\WINDOWS\ for kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    Start Application: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe
start CreateProcess 
    Successfully started C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe s7otbxsx, Returnvalue: 1
 
    Shall start s7eptisx.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for s7eptisx.exe in C:\WINDOWS\System32\
    Could not find application s7eptisx.exe in C:\WINDOWS\System32\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
END  StartAppl
End  Comp_BeforeDataMove()


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\System32\s7onlinx.dll.ren" -> "C:\WINDOWS\System32\s7onlinx.dll"
    	Movefile
    	by-msi-copied (701.400.102.6) and new file (701.200.101.1) have a version: compare
    		by-msi-copied is newer version: move
    	try to move the file 'C:\WINDOWS\System32\s7onlinx.dll.ren' to 'C:\WINDOWS\System32\s7onlinx.dll
	MoveFile returned error 183
    	* Old: Shared Counter of 'C:\WINDOWS\System32\s7onlinx.dll.ren' before decreasing: 1
    	Reboot needed.
    	Windows NTx: write to PendingFileRenameOperations
	MoveFileEx: "C:\WINDOWS\System32\s7onlinx.dll.ren" ==> "C:\WINDOWS\System32\s7onlinx.dll"
    	Returned from AdsMoveFile
 CopyLockedFiles (RenameFilesAtReboot): end


WriteRegistryValues
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\MPI] "DescTextK" = "WinCC MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1k" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2k" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3k" = "User/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1j" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2j" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3j" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultJ" = "ISO
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextJ" = "ISO
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextJ" = "NDIS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\LogNames\MPI] "DescTextJ" = "WinCC MPI 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextJ" = "IE-PG
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultJ" = "IE-PG
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextJ" = "TCP/IP
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultJ" = "TCP/IP Protokoll (RFC-1006)
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextJ" = "NDIS
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\S7ONLINE] "DescTextK" = "STEP 7 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1j" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2j" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3j" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1k" = "Std/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2k" = "Uni/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3k" = "User/
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextK" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\Siemens\SINEC\LogNames\S7ONLINE] "DescTextJ" = "STEP 7 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextJ" = "MPI 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultJ" = "MPI 
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultJ" = "
 
    	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextJ" = "


StartApplAfter
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Service, Returnvalue: 0
 
    Shall start s7osuasx.exe in C:\Siemens\Common\S7SDD\
    ChangeDirectory to C:\Siemens\Common\S7SDD for s7osuasx.exe in C:\Siemens\Common\S7SDD\
    Start Application: C:\Siemens\Common\S7SDD\s7osuasx.exe
start CreateProcess 
================================================================================
[2007-01-01 17:34:41,203]
S7SDD Setup Application - Installation

Install S7SDD from C:\Siemens\Common\S7SDD to C:\WINDOWS\Inf\

	Attention: found old softbusdriver - driver splitted !
    Successfully started C:\Siemens\Common\S7SDD\s7osuasx.exe -i, Returnvalue: -1073741819
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Start, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 4
 
    Shall start sndeloem.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for sndeloem.exe in C:\WINDOWS\System32\
    Start Application: C:\WINDOWS\System32\sndeloem.exe
start CreateProcess 
    Successfully started C:\WINDOWS\System32\sndeloem.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for sntinstp.exe in C:\WINDOWS\System32\
    Start Application: C:\WINDOWS\System32\SNTINSTP.EXE
start CreateProcess 
    Successfully started C:\WINDOWS\System32\SNTINSTP.EXE -e Siem_ISOTrans, Returnvalue: 1
 
    Shall start sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    ChangeDirectory to C:\Siemens\Common\S7IEPG\CP1612 for sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    Start Application: C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\System32\
    ChangeDirectory to C:\WINDOWS\System32 for sntinstp.exe in C:\WINDOWS\System32\
    Start Application: C:\WINDOWS\System32\SNTINSTP.EXE
start CreateProcess 
    Successfully started C:\WINDOWS\System32\SNTINSTP.EXE -e s7snsrtx, Returnvalue: 1
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe
start CreateProcess 
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -service, Returnvalue: 0
 
    Shall start SC.EXE in C:\WINDOWS\System32\
    Start Application silent: C:\WINDOWS\System32\sc.exe
start CreateProcess 
    Successfully started C:\WINDOWS\System32\sc.exe config S7TraceServiceX start= auto, Returnvalue: 0
 
    Shall start NET.EXE in C:\WINDOWS\System32\
    Start Application silent: C:\WINDOWS\System32\net.exe
start CreateProcess 
    Successfully started C:\WINDOWS\System32\net.exe START S7TraceServiceX, Returnvalue: 0
 
END  StartApplAfter

    The INI-File forces reboot.

    Add Client:                     PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
    Write Version:                  7.1
    Write Release:                  K07.01.04.00_01.02.00.06
    Display Name                    SIMATIC Device Drivers
    Logfilename                     C:\WINDOWS\S7DOS_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7DOS
    Write Restart:                  1
    Write Logfilename:              C:\WINDOWS\S7DOS_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-1-2007, 17:35:07 ;;;;;;
================================== START =======================================
'setup.exe' MSI Caller - Filerelease: 201.111.1701.1 - Copyright (C) S AG 2008
======= Timestamp logfile begin: 2007-01-03,  12:53:28
 LoggingLevel: 11
Path of .msi file: F:\sw\simnetpc\S7dos\setup\
 Test and install MSI:
    Found MSI folder: C:\WINDOWS\system32\
    MSI Version required: 3.1.4000.1823  /  MSI Version installed: 3.1.4001.5512
    DCOM verification.
    DCOM settings O.K.
 End of TestMSI.
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\CompSetup'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\S7DOS'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\S7DOS\Clients'
    Clientname from registry: SIMATIC NET PC SOFTWARE2
    Länge Clientname: 24
    Setup language from registry: B
 SetupLanguage chosen: 1033
 No transform necessary. Language: B
    Test for Mutex...   [12:53:28]
	No MSI active (no Mutex existing)
Stream out from: F:\sw\simnetpc\S7dos\setup\simatic device drivers.msi
Stream out to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
Stream out: Steuerdatei
Stream return: 0
OS type: WNT: WXP
OS edition: PED
Operating systems allowed due to ini: Win2000
    WXP found.
 Test and install ISScript:
    Yes. 1. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriver2.exe
    Yes. 2. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriverT.exe
    Yes. IS path from registry exists: C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriver2.exe: vers. required: 11.0.0.28844  / vers. installed: 11.0.0.28844
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriverT.exe: vers. required:  11.0.0.28844  / vers. installed: 11.0.0.28844
    ISscript 11 installed in correct version.
	D e i n s t a l l a t i o n
    Test for Mutex...   [12:53:30]
	No MSI active (no Mutex existing)
 
 Deinstall section:
    Full release you want to install: V08.0.04.0_01.02.0.03
    MsiQueryProductStateFct: Componentsetup is installed for GUID: {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 2, MsiCompInstalled: -1
    UpdateMode to activate..
    UpdateMode activated by setting 'Software\Siemens\Shared Tools\CompSetup\S7DOS\Deinstall'
    ! bOverWriteSameRel gesetzt!
    Older component release installed: You´re trying to upgrade from K07.01.04.00_01.02.00.06 to K08.00.04.00_01.02.00.03
    Pre-Deinstallation necessary...
    Save Client: PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
    Save Client: PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}
    Save Client: STEP7_{DF316006-FA84-40B0-B9B0-880B6487D5D7}
    Delete Client: PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
    Delete Client: PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}
    Delete Client: STEP7_{DF316006-FA84-40B0-B9B0-880B6487D5D7}
    Set MSI Clients: :
    SavePendingRenameOp function.
    SavePendingRename: Classification: 0
    Client entry set:SIMATIC NET PC SOFTWARE2
Launch deinstallation by MSI: msiexec.exe /x {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6} /qn  ADS_DEINST=Pre /L*v "C:\WINDOWS\Setup\Logfiles\S7DOS_LOG_msi_uninst_intern.txt"
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [12:53:30]
    called line: C:\WINDOWS\system32\msiexec.exe /x {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6} /qn  ADS_DEINST=Pre /L*v "C:\WINDOWS\Setup\Logfiles\S7DOS_LOG_msi_uninst_intern.txt"
    maximum waiting time= 1 minutes

Ext:  - Nested:  - Deinst: Pre
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 1-3-2007, 12:53:32

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.02_11.00.00.01
Frame Date:       2007-05-10

    --- Deinstallation--- !
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
 Streamed out for 'StartSetupAppl': kill.exe
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release:                    K07.01.04.00_01.02.00.06
Version: 7.1
No 'version.ini' file read because of Deinstall.
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: _ADS_SetDirs  beginn
 set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  end

    TRACE: create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    TRACE: Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
CA: _ADS_UnRegisterFiles  begin

UnRegisterFiles:
CA: _ADS_UnRegisterFiles  end

    
    Uninstalling shared component...
    
    Property ADS_DEINST, read successfully: Pre
    Property ADS_CALLED_NESTED, read successfully: 
    Now test Uninstall dependencies...

Main Path and Common Path determination:

Common directory
    Common Path exists: C:\Siemens\Common
    Common path not changed because already installed: D:\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    Property INSTALLDIR not changed because already installed: C:\Archivos de programa\
     
     
PreUIStartAppl
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Stop, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 1
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe
start CreateProcess 
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -UnRegServer, Returnvalue: 0
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe
start CreateProcess 
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -UnregServer, Returnvalue: 0
 
END  PreUIStartAppl
CA: _ADS_EraseDirs  begin
CA: _ADS_EraseDirs  end


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_REMOVED (action state) or INSTALLSTATE_ADVERTISED - Install state: INSTALLSTATE_LOCAL
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\System32\s7onlinx.dll.ren" -> "C:\WINDOWS\System32\s7onlinx.dll"
    	Movefile
       * WARNING: 	by-msi-copied file not found: C:\WINDOWS\System32\s7onlinx.dll.ren
    	Returned from AdsMoveFile
 CopyLockedFiles (RenameFilesAtReboot): end

    Increase Property 'ADS_WARNINGCOUNT': to 1
    Increase Property 'ADS_WARNING1COUNT': to 1
??? I_WARNING: Problems deleting own key: Software\Siemens\Shared Tools\S7DOS
    
    Uninstall finished normally.
    
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 12:53:51 ;;;;;;

End CreateProcess  return=0  [12:53:51] 

================================================================================
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
 Deinstallation ended. Return code: 0
    compsetup compsetup\client already deleted.
    RestorePendingRenameOp:
    RestorePendingRename: Classification: -2
======= Timestamp before install execution: 2007-01-03,  12:53:51
	I n s t a l l a t i o n
    Test for Mutex...   [12:53:51]
	No MSI active (no Mutex existing)
 
 Install section:
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
    Component not (already and/or no longer) installed: Will install it...
    Client entry set:SIMATIC NET PC SOFTWARE2
 Launch installation:  [12:53:51]
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [12:53:51]
    called line: C:\WINDOWS\system32\msiexec.exe /i "F:\sw\simnetpc\S7dos\setup\simatic device drivers.msi" /qb-! /L*V "C:\WINDOWS\SETUP\LOGFILES\S7DOS_LOG_MSI_INTERN.TXT"  ALLUSERS=1 TIMEOUT=20 ADS_CALLED_EXTERNAL=1 OVERINSTALL=YES
    TRACE: Default TIMEOUT value was changed to 20 minutes
    maximum waiting time= 20 minutes


CA: _ExitIfStandAlone   [2007-01-03 12:53:54]
Ext: 1 - Nested:  - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 1-3-2007, 12:53:54

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 12:53:54
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 12:53:54

CA: _StreamOutSteuerdatei  BEGIN  [12:53:54]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
  Streamed out for 'StartSetupAppl': kill.exe
CA: _StreamOutSteuerdatei  END  [12:53:54]

CA: Comp_Initialize  START 12:53:54
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release: K08.00.04.00_01.02.00.03
Version: 8.0
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: 

    Change Setup Language?
    Wanted: D, actual:  B
CA: Comp_Initialize  END 12:53:55

CA: _ADS_SetDirs  BEGIN  [12:53:55]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  END  [12:53:55]

CA: Comp_BeforeDataMove  START 12:54:02

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2000
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    read Global SharedPath from registy: C:\Siemens\Common
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     
    Set UpdateMode= Install after Pre-Uninstall

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

Deinstall Key: Comp_Def


StartAppl
 
    Shall start kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    ChangeDirectory to C:\WINDOWS\ for kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    Start Application: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe

start CreateProcess  [12:54:04]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe s7otbxsx, Returnvalue: 0
 
    Shall start s7eptisx.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for s7eptisx.exe in C:\WINDOWS\system32\
    Could not find application s7eptisx.exe in C:\WINDOWS\system32\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
END  StartAppl
CA: Comp_BeforeDataMove  END 12:54:07
Create Users and Groups
MaxCount: 
Create Users
    TRACE: [CreateUser] User1=
MaxCount: 
Create Groups
    TRACE: [CreateGroup] Group1=Siemens TIA Engineer
Condition1=VersionNT>=600
Evaluate Condition1=VersionNT>=600, return 0
Create Users and Groups End

Attach Users to Groups
MaxCount: 
Attach Users to groups 
    TRACE: [AttachUser] User1=ww
Condition1=VersionNT>=600
Evaluate Condition1=VersionNT>=600, return 0
Attach Users to Groups End

Change Permissions
Change Permissions in registry
MaxCount: 
    TRACE: [ChangeRegPermissions] Key1=SOFTWARE\Siemens\Sinec
Condition1=VersionNT>=600
Evaluate Condition1=VersionNT>=600, return 0
    TRACE: [ChangeRegPermissions] Key1=SOFTWARE\SIEMENS\SIMATIC_NET
Condition2=VersionNT>=600
Evaluate Condition2=VersionNT>=600, return 0
MaxCount: 
Change Permissions on folders
SecChangePermission End
Change Permissions End

CA: _ads_copyfiles  BEGIN 12:54:20


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\system32\s7onlinx.dll.ren" -> "C:\WINDOWS\system32\s7onlinx.dll"
    TRACE: 	Read shared counter
    	Movefile
    TRACE: 	Read by-msi-copied file version
    TRACE: 	Read new file version
    	by-msi-copied (800.400.102.3) and new file (701.400.102.6) have a version: compare
    		by-msi-copied is newer version: move
    	try to move the file 'C:\WINDOWS\system32\s7onlinx.dll.ren' to 'C:\WINDOWS\system32\s7onlinx.dll
	MoveFile returned error 183
    	* Old: Shared Counter of 'C:\WINDOWS\system32\s7onlinx.dll.ren' before decreasing: 1
    	Reboot needed.
    	Windows NTx: write to PendingFileRenameOperations
	MoveFileEx: "C:\WINDOWS\system32\s7onlinx.dll.ren" ==> "C:\WINDOWS\system32\s7onlinx.dll"
    TRACE: 	End of AdsMoveFile
    	Returned from AdsMoveFile
    TRACE:  testing for next..
 CopyLockedFiles (RenameFilesAtReboot): end


Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [12:54:21]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
 
    TRACE: Extract Entryname from REG_S7OWINCK.REG.3B27FA70_D7EB_41DC_9C55_D90D20D3D3AE_2459 begin: 0 end: 58 
    TRACE: Component: S7OWINCK.REG.3B27FA70_D7EB_41DC_9C55_D90D20D3D3AE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\MPI] "DescTextK" = "WinCC MPI
 
    TRACE: Extract Entryname from REG_S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE_2456 begin: 59 end: 117 
    TRACE: Component: S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1k" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE_2457 begin: 118 end: 176 
    TRACE: Component: S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2k" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE_2458 begin: 177 end: 235 
    TRACE: Component: S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3k" = "User/
 
    TRACE: Extract Entryname from REG_S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971_2330 begin: 236 end: 294 
    TRACE: Component: S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1j" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971_2331 begin: 295 end: 353 
    TRACE: Component: S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2j" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971_2332 begin: 354 end: 412 
    TRACE: Component: S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3j" = "
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2367 begin: 413 end: 472 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2368 begin: 473 end: 532 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2369 begin: 533 end: 592 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextJ" = "MPI
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2370 begin: 593 end: 652 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultJ" = "MPI
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2372 begin: 653 end: 712 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2333 begin: 713 end: 772 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2334 begin: 773 end: 832 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2335 begin: 833 end: 892 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextJ" = "MPI
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2336 begin: 893 end: 952 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2338 begin: 953 end: 1012 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3218 begin: 1013 end: 1069 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3219 begin: 1070 end: 1126 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultJ" = "ISO
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3226 begin: 1127 end: 1183 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3227 begin: 1184 end: 1240 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextJ" = "ISO
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3245 begin: 1241 end: 1297 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3246 begin: 1298 end: 1354 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextJ" = "NDIS
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2418 begin: 1355 end: 1414 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2419 begin: 1415 end: 1474 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2420 begin: 1475 end: 1534 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2421 begin: 1535 end: 1594 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2423 begin: 1595 end: 1654 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7OWINCJ.REG.473EEDC0_189B_485E_A417_F7E74C244D92_2311 begin: 1655 end: 1713 
    TRACE: Component: S7OWINCJ.REG.473EEDC0_189B_485E_A417_F7E74C244D92
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\LogNames\MPI] "DescTextJ" = "WinCC MPI 
 
    TRACE: Extract Entryname from REG_S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7_3282 begin: 1714 end: 1773 
    TRACE: Component: S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7_3283 begin: 1774 end: 1833 
    TRACE: Component: S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2384 begin: 1834 end: 1893 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2385 begin: 1894 end: 1953 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2386 begin: 1954 end: 2013 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2387 begin: 2014 end: 2073 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2389 begin: 2074 end: 2133 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7OSOBUK.REG.2033A3F1_8F5C_49F5_9245_11AC62F6061B_2450 begin: 2134 end: 2192 
    TRACE: Component: S7OSOBUK.REG.2033A3F1_8F5C_49F5_9245_11AC62F6061B
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2350 begin: 2193 end: 2252 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2351 begin: 2253 end: 2312 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2352 begin: 2313 end: 2372 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextJ" = "MPI
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2353 begin: 2373 end: 2432 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2355 begin: 2433 end: 2492 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196_3284 begin: 2493 end: 2552 
    TRACE: Component: S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextJ" = "IE-PG
 
    TRACE: Extract Entryname from REG_S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196_3285 begin: 2553 end: 2612 
    TRACE: Component: S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultJ" = "IE-PG
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3147 begin: 2613 end: 2671 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextJ" = "TCP/IP
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3148 begin: 2672 end: 2730 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3155 begin: 2731 end: 2789 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultJ" = "TCP/IP Protokoll (RFC-1006)
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3156 begin: 2790 end: 2848 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3177 begin: 2849 end: 2907 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextJ" = "NDIS
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3178 begin: 2908 end: 2966 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODEFAK.REG.5E497676_CA75_4884_B804_8C6D0C9A755D_2436 begin: 2967 end: 3025 
    TRACE: Component: S7ODEFAK.REG.5E497676_CA75_4884_B804_8C6D0C9A755D
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\S7ONLINE] "DescTextK" = "STEP 7 
 
    TRACE: Extract Entryname from REG_S7OSOBUJ.REG.1AC8F707_2701_4912_9502_ED41FD7854C0_2310 begin: 3026 end: 3084 
    TRACE: Component: S7OSOBUJ.REG.1AC8F707_2701_4912_9502_ED41FD7854C0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8_2326 begin: 3085 end: 3143 
    TRACE: Component: S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1j" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8_2327 begin: 3144 end: 3202 
    TRACE: Component: S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2j" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8_2328 begin: 3203 end: 3261 
    TRACE: Component: S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3j" = "
 
    TRACE: Extract Entryname from REG_S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631_2452 begin: 3262 end: 3320 
    TRACE: Component: S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1k" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631_2453 begin: 3321 end: 3379 
    TRACE: Component: S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2k" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631_2454 begin: 3380 end: 3438 
    TRACE: Component: S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3k" = "User/
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2401 begin: 3439 end: 3498 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2402 begin: 3499 end: 3558 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2403 begin: 3559 end: 3618 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2404 begin: 3619 end: 3678 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2406 begin: 3679 end: 3738 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2437 begin: 3739 end: 3797 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2438 begin: 3798 end: 3856 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2439 begin: 3857 end: 3915 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2440 begin: 3916 end: 3974 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2441 begin: 3975 end: 4033 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODEFAJ.REG.7387EA2F_9FE2_4981_AC6A_625305D95695_2309 begin: 4034 end: 4092 
    TRACE: Component: S7ODEFAJ.REG.7387EA2F_9FE2_4981_AC6A_625305D95695
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\LogNames\S7ONLINE] "DescTextJ" = "STEP 7 
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2312 begin: 4093 end: 4151 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextJ" = "MPI 
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2313 begin: 4152 end: 4210 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultJ" = "MPI 
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2314 begin: 4211 end: 4269 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2315 begin: 4270 end: 4328 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultJ" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2316 begin: 4329 end: 4387 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextJ" = "
CA: _ADS_WriteRegistryValues  END  [12:54:22]

CA: Comp_AfterDataMove  START 12:54:22


StartApplAfter
 
    Shall start sntinstp.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sntinstp.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\SNTINSTP.EXE

start CreateProcess  [12:54:22]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\SNTINSTP.EXE -e s7opcsrtx, Returnvalue: 1
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [12:54:47]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Service, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [12:54:50]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Start, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [12:54:52]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 4
 
    Shall start s7osuasx.exe in C:\Siemens\Common\S7SDD\
    ChangeDirectory to C:\Siemens\Common\S7SDD for s7osuasx.exe in C:\Siemens\Common\S7SDD\
    Start Application: C:\Siemens\Common\S7SDD\s7osuasx.exe

start CreateProcess  [12:54:54]
    Default TIMEOUT value was changed to 20 minutes
================================================================================
[2007-01-03 12:54:54,265]
S7SDD Setup Application - Installation

Install S7SDD from C:\Siemens\Common\S7SDD to C:\WINDOWS\Inf\

Install C:\Siemens\Common\S7SDD\c5511w2k.inf 
	search for old INF-Files with HwId PCMCIA\SIEMENS-CP_5511-8DE1 
	Device PCMCIA\SIEMENS-CP_5511-8DE1  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\c5511w2k.inf
Install C:\Siemens\Common\S7SDD\s7o5512x.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_4021&SUBSYS_00000000&REV_01 
	Device PCI\VEN_110A&DEV_4021&SUBSYS_00000000&REV_01  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7o5512x.inf
Install C:\Siemens\Common\S7SDD\S7opciax.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_3141&SUBSYS_000110b5 
	Device PCI\VEN_110A&DEV_3141&SUBSYS_000110b5  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\S7opciax.inf
Install C:\Siemens\Common\S7SDD\s7oppilx.inf 
	search for old INF-Files with HwId *SIEA040 
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7oppilx.inf
Install C:\Siemens\Common\S7SDD\s7os41px.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_403A&SUBSYS_403B110A&REV_01 
	Device PCI\VEN_110A&DEV_403A&SUBSYS_403B110A&REV_01  is not currently attached to the computer
	give installation some time 
	install next device --------------------
	search for old INF-Files with HwId PCI\VEN_110A&DEV_403A&SUBSYS_403C110A&REV_01 
	Device PCI\VEN_110A&DEV_403A&SUBSYS_403C110A&REV_01  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7os41px.inf
Install C:\Siemens\Common\S7SDD\s7os41xx.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_4009&SUBSYS_4006110A&REV_01 
	Device PCI\VEN_110A&DEV_4009&SUBSYS_4006110A&REV_01  is not currently attached to the computer
	give installation some time 
	install next device --------------------
	search for old INF-Files with HwId PCI\VEN_110A&DEV_4009&SUBSYS_4008110A&REV_01 
	Device PCI\VEN_110A&DEV_4009&SUBSYS_4008110A&REV_01  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7os41xx.inf
Install C:\Siemens\Common\S7SDD\s7oserix.inf 
	search for old INF-Files with HwId *SIEA042 
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7oserix.inf
Install C:\Siemens\Common\S7SDD\s7osobux.inf 
	search for old INF-Files with HwId Root\SoftBus 
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7osobux.inf
[2007-01-03 12:55:16,000]
================================================================================
S7SDD was successfull installed
    Successfully started C:\Siemens\Common\S7SDD\s7osuasx.exe -i, Returnvalue: 1
 
    Shall start sndeloem.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sndeloem.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\sndeloem.exe

start CreateProcess  [12:55:17]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\sndeloem.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sntinstp.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\SNTINSTP.EXE

start CreateProcess  [12:55:19]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\SNTINSTP.EXE -e Siem_ISOTrans, Returnvalue: 1
 
    Shall start sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    ChangeDirectory to C:\Siemens\Common\S7IEPG\CP1612 for sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    Start Application: C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe

start CreateProcess  [12:55:21]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sntinstp.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\SNTINSTP.EXE

start CreateProcess  [12:55:23]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\SNTINSTP.EXE -e s7snsrtx, Returnvalue: 1
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe

start CreateProcess  [12:55:25]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -service, Returnvalue: 0
 
    Shall start SC.EXE in C:\WINDOWS\system32\
    Start Application silent: C:\WINDOWS\system32\sc.exe

start CreateProcess  [12:55:27]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\sc.exe config S7TraceServiceX start= auto, Returnvalue: 0
 
    Shall start NET.EXE in C:\WINDOWS\system32\
    Start Application silent: C:\WINDOWS\system32\net.exe

start CreateProcess  [12:55:29]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\net.exe START S7TraceServiceX, Returnvalue: 0
 
    Shall start reg.exe in C:\WINDOWS\system32\
    Start Application silent: C:\WINDOWS\system32\reg.exe

start CreateProcess  [12:55:33]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\reg.exe FLAGS HKLM\Software\Siemens\Sinec SET DONT_VIRTUALIZE DONT_SILENT_FAIL, Returnvalue: 1
 
END  StartApplAfter

    The INI-File forces reboot.

    Add Client:                     SIMATIC NET PC SOFTWARE2
    Write Version:                  8.0
    Write Release:                  K08.00.04.00_01.02.00.03
    Display Name                    SIMATIC Device Drivers
    Logfilename                     C:\WINDOWS\S7DOS_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7DOS
    Write Restart:                  1
    Write Logfilename:              C:\WINDOWS\S7DOS_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 12:55:35

CA: IniC_DeleteIniFiles  START 12:55:35
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 12:55:35
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 12:55:35 ;;;;;;

End CreateProcess  return=3010  [12:55:35] 

================================================================================
 MSI returncode = 3010   (0 = OK)
 Appresult value= 1   (1 would be OK)
 SetupSucceeded Value= 1  (1 or 2 would be OK)
 Client entry set empty - compsetup finished.
    Add saved Client PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
    Add saved Client PLCSim_{B440401C-4804-4F2D-998C-ACF5FC83DA5F}
    Add saved Client STEP7_{DF316006-FA84-40B0-B9B0-880B6487D5D7}
 'setup.exe' finished.
======= Timestamp logfile end: 2007-01-03,  12:55:35
================================================================================
=================================== END ========================================
 
 
================================================================================
[2007-01-03 12:57:14,609]
S7SDD Setup Application - Installation

================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...
Installation skipped without starting Windows Installer: Only new client entries will be noted. OK.
================================== START =======================================
'setup.exe' MSI Caller - Filerelease: 201.111.1701.1 - Copyright (C) S AG 2008
======= Timestamp logfile begin: 2007-01-03,  14:48:28
 LoggingLevel: 11
Path of .msi file: F:\sw\simnetpc\S7dos\setup\
 Test and install MSI:
    Found MSI folder: C:\WINDOWS\system32\
    MSI Version required: 3.1.4000.1823  /  MSI Version installed: 3.1.4001.5512
    DCOM verification.
    DCOM settings O.K.
 End of TestMSI.
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\CompSetup'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\S7DOS'
    TestRegistryRights: Registry write access OK in key 'Software\Siemens\Shared Tools\S7DOS\Clients'
    Clientname from registry: SIMATIC NET PC SOFTWARE2
    Länge Clientname: 24
    Setup language from registry: B
 SetupLanguage chosen: 1033
 No transform necessary. Language: B
    Test for Mutex...   [14:48:28]
	No MSI active (no Mutex existing)
Stream out from: F:\sw\simnetpc\S7dos\setup\simatic device drivers.msi
Stream out to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
Stream out: Steuerdatei
Stream return: 0
OS type: WNT: WXP
OS edition: PED
Operating systems allowed due to ini: Win2000
    WXP found.
 Test and install ISScript:
    Yes. 1. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriver2.exe
    Yes. 2. ISscript critical registry value existing: C:\ARCHIV~1\ARCHIV~1\INSTAL~1\Driver\11\INTEL3~1\IDriverT.exe
    Yes. IS path from registry exists: C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriver2.exe: vers. required: 11.0.0.28844  / vers. installed: 11.0.0.28844
    C:\Archivos de programa\Archivos comunes\InstallShield\Driver\11\Intel 32\IDriverT.exe: vers. required:  11.0.0.28844  / vers. installed: 11.0.0.28844
    ISscript 11 installed in correct version.
	D e i n s t a l l a t i o n
    Test for Mutex...   [14:48:29]
	No MSI active (no Mutex existing)
 
 Deinstall section:
    Full release you want to install: V08.0.04.0_01.02.0.03
    MsiQueryProductStateFct: Componentsetup is installed for GUID: {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 2, MsiCompInstalled: -1
    UpdateMode to activate..
    UpdateMode activated by setting 'Software\Siemens\Shared Tools\CompSetup\S7DOS\Deinstall'
    ! bOverWriteSameRel gesetzt!
    Same component release installed: You´re trying to upgrade from K08.00.04.00_01.02.00.03 to K08.00.04.00_01.02.00.03
    Pre-Deinstallation necessary...
    Save Client: PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
    Delete Client: PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
    Set MSI Clients: :
    SavePendingRenameOp function.
    SavePendingRename: Classification: 0
    Client entry set:SIMATIC NET PC SOFTWARE2
Launch deinstallation by MSI: msiexec.exe /x {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6} /qn  ADS_DEINST=Pre /L*v "C:\WINDOWS\Setup\Logfiles\S7DOS_LOG_msi_uninst_intern.txt"
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [14:48:30]
    called line: C:\WINDOWS\system32\msiexec.exe /x {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6} /qn  ADS_DEINST=Pre /L*v "C:\WINDOWS\Setup\Logfiles\S7DOS_LOG_msi_uninst_intern.txt"
    maximum waiting time= 1 minutes


CA: _ExitIfStandAlone   [2007-01-03 14:48:32]
Ext:  - Nested:  - Deinst: Pre
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 1-3-2007, 14:48:32

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 14:48:32
    --- Deinstallation--- !
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 14:48:32

CA: _StreamOutSteuerdatei  BEGIN  [14:48:32]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
  Streamed out for 'StartSetupAppl': kill.exe
CA: _StreamOutSteuerdatei  END  [14:48:32]

CA: Comp_Initialize  START 14:48:32
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release: K08.00.04.00_01.02.00.03
Version: 8.0
No 'version.ini' file read because of Deinstall.
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: B

    Change Setup Language?
    The language is up to date.
CA: Comp_Initialize  END 14:48:32

CA: _ADS_SetDirs  BEGIN  [14:48:33]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  END  [14:48:33]

CA: Comp_BeforeDataMoveUninstall  START 14:48:33
    
Uninstalling shared component...
    
    Property ADS_DEINST, read successfully: Pre
    Property ADS_CALLED_NESTED, read successfully: 
    Now test Uninstall dependencies...

Main Path and Common Path determination:

Common directory
    read Global SharedPath from registy: C:\Siemens\Common
    Common Path exists: C:\Siemens\Common
    Common path not changed because already installed: D:\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR from Registry: 
    Property INSTALLDIR not changed because already installed: 
     
     
PreUIStartAppl
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [14:48:33]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Stop, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [14:48:36]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 1
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [14:48:38]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -UnRegServer, Returnvalue: 0
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe

start CreateProcess  [14:48:40]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -UnregServer, Returnvalue: 0
 
END  PreUIStartAppl
CA: Comp_BeforeDataMoveUninstall  END 14:48:42

Remove Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_UnRegisterFiles  BEGIN  [14:48:51]
UnRegisterFiles:
CA: _ADS_UnRegisterFiles  END  [14:48:51]

CA: _ADS_EraseDirs  BEGIN  [14:48:51]
CA: _ADS_EraseDirs  END  [14:48:51]

CA: _ads_copyfiles  BEGIN 14:48:54


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_REMOVED (action state) or INSTALLSTATE_ADVERTISED - Install state: INSTALLSTATE_LOCAL
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\system32\s7onlinx.dll.ren" -> "C:\WINDOWS\system32\s7onlinx.dll"
    TRACE: 	Read shared counter
    	Movefile
    TRACE: 	Read by-msi-copied file version
       * WARNING: 	by-msi-copied file not found: C:\WINDOWS\system32\s7onlinx.dll.ren
    	Returned from AdsMoveFile
    TRACE:  testing for next..
 CopyLockedFiles (RenameFilesAtReboot): end


CA: _ads_copyfiles  END 14:48:54
    Increase Property 'ADS_WARNINGCOUNT': to 1
    Increase Property 'ADS_WARNING1COUNT': to 1

CA: Comp_AfterDataMoveUninstall  START 14:48:54
??? I_WARNING: Problems deleting own key: Software\Siemens\Shared Tools\S7DOS
    
    Uninstall finished normally.
    
CA: Comp_AfterDataMoveUninstall  END 14:48:54

CA: IniC_DeleteIniFiles  START 14:48:54
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 14:48:54
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 14:48:54 ;;;;;;

End CreateProcess  return=0  [14:48:54] 

================================================================================
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
 Deinstallation ended. Return code: 0
    RestorePendingRenameOp:
    RestorePendingRename: Classification: -2
======= Timestamp before install execution: 2007-01-03,  14:48:54
	I n s t a l l a t i o n
    Test for Mutex...   [14:48:54]
	No MSI active (no Mutex existing)
 
 Install section:
    MsiQueryProductStateFct: Componentsetup is NOT installed for GUID: {CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    IsInstalled: 0, MsiCompInstalled: 0
    Component not (already and/or no longer) installed: Will install it...
    Client entry set:SIMATIC NET PC SOFTWARE2
 Launch installation:  [14:48:54]
    TRACE: Call_msiexec:  MSI-Folder= C:\WINDOWS\system32\
    TRACE: OS XP:  use CreateProcess

Start CreateProcess:  [14:48:54]
    called line: C:\WINDOWS\system32\msiexec.exe /i "F:\sw\simnetpc\S7dos\setup\simatic device drivers.msi" /qb-! /L*V "C:\WINDOWS\SETUP\LOGFILES\S7DOS_LOG_MSI_INTERN.TXT"  ALLUSERS=1 TIMEOUT=20 ADS_CALLED_EXTERNAL=1 OVERINSTALL=YES
    TRACE: Default TIMEOUT value was changed to 20 minutes
    maximum waiting time= 20 minutes


CA: _ExitIfStandAlone   [2007-01-03 14:48:58]
Ext: 1 - Nested:  - Deinst: 
 
--------------------------------------------------------------------------------
 
***  SETUP LOGFILE *** - Shared Component Setup (MSI V3.1/IS V11)

Filename:      S7DOS_LOG.TXT
Install start: 1-3-2007, 14:48:58

Frame Name:       Component_Masterframe
Frame Version:    V02.01.01.19_11.00.00.02
Frame Date:       2008-05-09


CA: IniC_StreamOutIniFiles  START 14:48:58
    -- MSI Neuinstallation angenommen. REINSTALL: 0
    Ini file will be: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
    Commandline at first: 
     
CA: IniC_StreamOutIniFiles  END 14:48:58

CA: _StreamOutSteuerdatei  BEGIN  [14:48:58]

StreamOut files from 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\'..
Streamed out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
  Streamed out for 'StartSetupAppl': kill.exe
CA: _StreamOutSteuerdatei  END  [14:48:58]

CA: Comp_Initialize  START 14:48:58
    The SETUP is started from: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
     
Commandline parameter:  INTERPRETED: 
    Trace: LoggingMax activated.
 
Official name of this Shared Component: SIMATIC Device Drivers
Internal name: S7DOS
Release: K08.00.04.00_01.02.00.03
Version: 8.0
Comparing with data of 'C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\version.ini' .
No MainProd found.

Setting setup language:
    Initial setup language dll: S7esetdb.DLL
    Get operating system (Win) language from KERNEL: Spanish ; D
    Get SetupLanguage as input-parameter of client from Registry: 

    Change Setup Language?
    Wanted: D, actual:  B
CA: Comp_Initialize  END 14:48:58

CA: _ADS_SetDirs  BEGIN  [14:48:59]
    TRACE:  STARTMENU_PLACE: AUTO
 Set classic startmenue= C:\Documents and Settings\All Users\Menú Inicio\
CA: _ADS_SetDirs  END  [14:48:59]

CA: Comp_BeforeDataMove  START 14:49:03

Test Operating System
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    Allowable OS: Win2000
    OperatingSystem condition string to check: ((VersionNT>=500))
    Condition is True: Installation is allowed.
User has Administrator rights, O.K.

Main Path and Common Path determination:

Common directory
    read Global SharedPath from registy: C:\Siemens\Common
    Common Path exists: C:\Siemens\Common
    Common path was set to: C:\Siemens\Common\
    Base Dir is Common Path: C:\Siemens\Common
    Dirs: Don´t use MAIN Path  !
    REINSTALL: 0
    INSTALLDIR was set to: C:\Siemens\Common\
     
     
    Set UpdateMode= Install after Pre-Uninstall

--- Test if Shared Component setup is new installation, overinstallation, update, install for new client:
    Test 8x2 Release ...
    
How to install component:
    New installation! No 'CLIENTS' key has existed; OK.

Deinstall Key: Comp_Def


StartAppl
 
    Shall start kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    ChangeDirectory to C:\WINDOWS\ for kill.exe in C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\
    Start Application: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe

start CreateProcess  [14:49:05]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\kill.exe s7otbxsx, Returnvalue: 0
 
    Shall start s7eptisx.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for s7eptisx.exe in C:\WINDOWS\system32\
    Could not find application s7eptisx.exe in C:\WINDOWS\system32\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Could not find application s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Perhaps product is not installed!
 
END  StartAppl
CA: Comp_BeforeDataMove  END 14:49:08
Create Users and Groups
MaxCount: 
Create Users
    TRACE: [CreateUser] User1=
MaxCount: 
Create Groups
    TRACE: [CreateGroup] Group1=Siemens TIA Engineer
Condition1=VersionNT>=600
Evaluate Condition1=VersionNT>=600, return 0
Create Users and Groups End

Attach Users to Groups
MaxCount: 
Attach Users to groups 
    TRACE: [AttachUser] User1=ww
Condition1=VersionNT>=600
Evaluate Condition1=VersionNT>=600, return 0
Attach Users to Groups End

Change Permissions
Change Permissions in registry
MaxCount: 
    TRACE: [ChangeRegPermissions] Key1=SOFTWARE\Siemens\Sinec
Condition1=VersionNT>=600
Evaluate Condition1=VersionNT>=600, return 0
    TRACE: [ChangeRegPermissions] Key1=SOFTWARE\SIEMENS\SIMATIC_NET
Condition2=VersionNT>=600
Evaluate Condition2=VersionNT>=600, return 0
MaxCount: 
Change Permissions on folders
SecChangePermission End
Change Permissions End

CA: _ads_copyfiles  BEGIN 14:49:19


 CopyLockedFiles (RenameFilesAtReboot): Stream out: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\CopyFiles.ini
  CopyLockedFiles: s7onlinx.dll.ren, Comp: S7ONLINX.DLL1.A2A5F3EE_EAA2_4572_91D9_C411A9B742D9
	Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    	Action: Move file
	
       MoveFile: Shall move "C:\WINDOWS\system32\s7onlinx.dll.ren" -> "C:\WINDOWS\system32\s7onlinx.dll"
    TRACE: 	Read shared counter
    	Movefile
    TRACE: 	Read by-msi-copied file version
    TRACE: 	Read new file version
    	by-msi-copied (800.400.102.3) and new file (800.400.102.3) have a version: compare
    		same version: move because of REINSTALLMODE 'E'
    	try to move the file 'C:\WINDOWS\system32\s7onlinx.dll.ren' to 'C:\WINDOWS\system32\s7onlinx.dll
    	MoveFile OK.
    	* Old: Shared Counter of 'C:\WINDOWS\system32\s7onlinx.dll.ren' before decreasing: 1
    TRACE: 	End of AdsMoveFile
    	Returned from AdsMoveFile
    TRACE:  testing for next..
 CopyLockedFiles (RenameFilesAtReboot): end


CA: _ads_copyfiles  END 14:49:19

Create Shortcuts...
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
  Streamout MBShortcuts to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBShortcuts.ini
  Startmenu language tested for shortcuts: 3082
  Startmenu language used for shortcuts: 1033
End Shortcuts


CA: _ADS_WriteRegistryValues  BEGIN  [14:49:19]
    create Directory for IniFile: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}
    Streamout MBRegEntries.ini to: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\MBRegEntries.ini
 
    TRACE: Extract Entryname from REG_S7OWINCK.REG.3B27FA70_D7EB_41DC_9C55_D90D20D3D3AE_2459 begin: 0 end: 58 
    TRACE: Component: S7OWINCK.REG.3B27FA70_D7EB_41DC_9C55_D90D20D3D3AE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\MPI] "DescTextK" = "WinCC MPI
 
    TRACE: Extract Entryname from REG_S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE_2456 begin: 59 end: 117 
    TRACE: Component: S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1k" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE_2457 begin: 118 end: 176 
    TRACE: Component: S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2k" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE_2458 begin: 177 end: 235 
    TRACE: Component: S7OTL2_K.REG.DF84DF51_0D30_4E91_8D47_BA1A23CEABEE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3k" = "User/
 
    TRACE: Extract Entryname from REG_S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971_2330 begin: 236 end: 294 
    TRACE: Component: S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1j" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971_2331 begin: 295 end: 353 
    TRACE: Component: S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2j" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971_2332 begin: 354 end: 412 
    TRACE: Component: S7OTAUTJ.REG.604AD3BA_ED9E_45FF_8C9F_DBAA6B7F9971
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3j" = "
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2367 begin: 413 end: 472 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2368 begin: 473 end: 532 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2369 begin: 533 end: 592 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextJ" = "MPI
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2370 begin: 593 end: 652 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultJ" = "MPI
 
    TRACE: Extract Entryname from REG__5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E_2372 begin: 653 end: 712 
    TRACE: Component: _5611___J.REG.845F0CFA_F5E8_4BF2_AD51_99AF16D3438E
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2333 begin: 713 end: 772 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2334 begin: 773 end: 832 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2335 begin: 833 end: 892 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextJ" = "MPI
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2336 begin: 893 end: 952 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    TRACE: Extract Entryname from REG__5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68_2338 begin: 953 end: 1012 
    TRACE: Component: _5512___J.REG.EFFD0B02_BDB0_40BA_875F_E29717237B68
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3218 begin: 1013 end: 1069 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3219 begin: 1070 end: 1126 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescDefaultJ" = "ISO
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3226 begin: 1127 end: 1183 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3227 begin: 1184 end: 1240 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\CP-ISO\NDi] "DescTextJ" = "ISO
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3245 begin: 1241 end: 1297 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228_3246 begin: 1298 end: 1354 
    TRACE: Component: CP_ISO.REG.DD62337E_4572_441A_B068_653D3FB99228
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\SNTIE] "DescTextJ" = "NDIS
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2418 begin: 1355 end: 1414 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2419 begin: 1415 end: 1474 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2420 begin: 1475 end: 1534 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2421 begin: 1535 end: 1594 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5611(MPI)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE_2423 begin: 1595 end: 1654 
    TRACE: Component: _5611___K.REG.2A350800_65F9_4124_8AA0_29C86BB082BE
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIE9020] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7OWINCJ.REG.473EEDC0_189B_485E_A417_F7E74C244D92_2311 begin: 1655 end: 1713 
    TRACE: Component: S7OWINCJ.REG.473EEDC0_189B_485E_A417_F7E74C244D92
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\LogNames\MPI] "DescTextJ" = "WinCC MPI 
 
    TRACE: Extract Entryname from REG_S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7_3282 begin: 1714 end: 1773 
    TRACE: Component: S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7_3283 begin: 1774 end: 1833 
    TRACE: Component: S7IETCPAK.REG.5B8F77F2_1838_48E7_BA40_FE977A8394D7
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2384 begin: 1834 end: 1893 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2385 begin: 1894 end: 1953 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2386 begin: 1954 end: 2013 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2387 begin: 2014 end: 2073 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67_2389 begin: 2074 end: 2133 
    TRACE: Component: _5511___K.REG.E4F25D9C_80A6_4201_B379_8E07E73A1E67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7OSOBUK.REG.2033A3F1_8F5C_49F5_9245_11AC62F6061B_2450 begin: 2134 end: 2192 
    TRACE: Component: S7OSOBUK.REG.2033A3F1_8F5C_49F5_9245_11AC62F6061B
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2350 begin: 2193 end: 2252 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescTextJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2351 begin: 2253 end: 2312 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(PROFIBUS)\NDi] "DescDefaultJ" = "PROFIBUS
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2352 begin: 2313 end: 2372 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescTextJ" = "MPI
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2353 begin: 2373 end: 2432 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5511(MPI)\Ndi] "DescDefaultJ" = "MPI
 
    TRACE: Extract Entryname from REG__5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0_2355 begin: 2433 end: 2492 
    TRACE: Component: _5511___J.REG.E7E35A61_D30E_452E_B525_B50774FA9EE0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA020] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196_3284 begin: 2493 end: 2552 
    TRACE: Component: S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescTextJ" = "IE-PG
 
    TRACE: Extract Entryname from REG_S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196_3285 begin: 2553 end: 2612 
    TRACE: Component: S7IETCPAJ.REG.396CEE13_0787_445F_9CBA_20DF1BEEA196
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\Sinec\DefDevices\DefaultLogDevices\TCP/IP(Auto)\NDi] "DescDefaultJ" = "IE-PG
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3147 begin: 2613 end: 2671 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextJ" = "TCP/IP
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3148 begin: 2672 end: 2730 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3155 begin: 2731 end: 2789 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultJ" = "TCP/IP Protokoll (RFC-1006)
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3156 begin: 2790 end: 2848 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\TCP/IP\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3177 begin: 2849 end: 2907 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextJ" = "NDIS
 
    TRACE: Extract Entryname from REG_CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626_3178 begin: 2908 end: 2966 
    TRACE: Component: CP_TCPIP.REG.A76CB388_6CCB_4DB8_BF89_B2224EA00626
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\MSTCP] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODEFAK.REG.5E497676_CA75_4884_B804_8C6D0C9A755D_2436 begin: 2967 end: 3025 
    TRACE: Component: S7ODEFAK.REG.5E497676_CA75_4884_B804_8C6D0C9A755D
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\LogNames\S7ONLINE] "DescTextK" = "STEP 7 
 
    TRACE: Extract Entryname from REG_S7OSOBUJ.REG.1AC8F707_2701_4912_9502_ED41FD7854C0_2310 begin: 3026 end: 3084 
    TRACE: Component: S7OSOBUJ.REG.1AC8F707_2701_4912_9502_ED41FD7854C0
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\s7osobux\DefaultLogDevice\PC internal (local)\Ndi] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8_2326 begin: 3085 end: 3143 
    TRACE: Component: S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "1j" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8_2327 begin: 3144 end: 3202 
    TRACE: Component: S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "2j" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8_2328 begin: 3203 end: 3261 
    TRACE: Component: S7OTL2_J.REG.290DB589_704E_48A3_A332_1D547B42DFF8
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\CP_TYPE\L2\Params\Busparam\Enum] "3j" = "
 
    TRACE: Extract Entryname from REG_S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631_2452 begin: 3262 end: 3320 
    TRACE: Component: S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "1k" = "Std/
 
    TRACE: Extract Entryname from REG_S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631_2453 begin: 3321 end: 3379 
    TRACE: Component: S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "2k" = "Uni/
 
    TRACE: Extract Entryname from REG_S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631_2454 begin: 3380 end: 3438 
    TRACE: Component: S7OTAUTK.REG.CD7F2149_427D_4DE7_AFBA_0FC5D7EE7631
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\CP_TYPE\AUTO_PRO\Params\Busparam\Enum] "3k" = "User/
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2401 begin: 3439 end: 3498 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2402 begin: 3499 end: 3558 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2403 begin: 3559 end: 3618 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2404 begin: 3619 end: 3678 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DefaultLogDevices\CP5512(MPI)\Ndi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG__5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F_2406 begin: 3679 end: 3738 
    TRACE: Component: _5512___K.REG.8D4B40DA_0439_4902_BD7A_66B41C4A186F
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\DefDevices\DeviceID\*SIEA025] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2437 begin: 3739 end: 3797 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2438 begin: 3798 end: 3856 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2439 begin: 3857 end: 3915 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2440 begin: 3916 end: 3974 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultK" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866_2441 begin: 3975 end: 4033 
    TRACE: Component: S7ODSMCK.REG.C249986D_E09A_414A_89AC_5100D6DB1866
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextK" = "
 
    TRACE: Extract Entryname from REG_S7ODEFAJ.REG.7387EA2F_9FE2_4981_AC6A_625305D95695_2309 begin: 4034 end: 4092 
    TRACE: Component: S7ODEFAJ.REG.7387EA2F_9FE2_4981_AC6A_625305D95695
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\Siemens\SINEC\LogNames\S7ONLINE] "DescTextJ" = "STEP 7 
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2312 begin: 4093 end: 4151 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescTextJ" = "MPI 
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2313 begin: 4152 end: 4210 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(MPI)\NDi] "DescDefaultJ" = "MPI 
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2314 begin: 4211 end: 4269 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescTextJ" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2315 begin: 4270 end: 4328 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DefaultLogDevices\PC Adapter(PROFIBUS)\NDi] "DescDefaultJ" = "
 
    TRACE: Extract Entryname from REG_S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67_2316 begin: 4329 end: 4387 
    TRACE: Component: S7ODSMCJ.REG.DE06F9D3_A70E_4F6F_8705_7FC091DEEF67
    Action state: INSTALLSTATE_LOCAL - Install state: INSTALLSTATE_ABSENT
    TRACE: Component selected
    TRACE: KeyRoot: HKLM
    Set [SOFTWARE\SIEMENS\SINEC\DefDevices\DeviceID\*SIEA010] "DescTextJ" = "
CA: _ADS_WriteRegistryValues  END  [14:49:21]

CA: Comp_AfterDataMove  START 14:49:21


StartApplAfter
 
    Shall start sntinstp.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sntinstp.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\SNTINSTP.EXE

start CreateProcess  [14:49:21]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\SNTINSTP.EXE -e s7opcsrtx, Returnvalue: 1
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [14:49:23]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Service, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [14:49:25]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -Start, Returnvalue: 0
 
    Shall start s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    ChangeDirectory to C:\Siemens\Common\S7IEPG for s7oiehsx.exe in C:\Siemens\Common\S7IEPG\
    Start Application: C:\Siemens\Common\S7IEPG\s7oiehsx.exe

start CreateProcess  [14:49:27]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\s7oiehsx.exe -GetState, Returnvalue: 4
 
    Shall start s7osuasx.exe in C:\Siemens\Common\S7SDD\
    ChangeDirectory to C:\Siemens\Common\S7SDD for s7osuasx.exe in C:\Siemens\Common\S7SDD\
    Start Application: C:\Siemens\Common\S7SDD\s7osuasx.exe

start CreateProcess  [14:49:29]
    Default TIMEOUT value was changed to 20 minutes
================================================================================
[2007-01-03 14:49:29,468]
S7SDD Setup Application - Installation

Install S7SDD from C:\Siemens\Common\S7SDD to C:\WINDOWS\Inf\

Install C:\Siemens\Common\S7SDD\c5511w2k.inf 
	search for old INF-Files with HwId PCMCIA\SIEMENS-CP_5511-8DE1 
	Device PCMCIA\SIEMENS-CP_5511-8DE1  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\c5511w2k.inf
Install C:\Siemens\Common\S7SDD\s7o5512x.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_4021&SUBSYS_00000000&REV_01 
	Device PCI\VEN_110A&DEV_4021&SUBSYS_00000000&REV_01  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7o5512x.inf
Install C:\Siemens\Common\S7SDD\S7opciax.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_3141&SUBSYS_000110b5 
	Device PCI\VEN_110A&DEV_3141&SUBSYS_000110b5  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\S7opciax.inf
Install C:\Siemens\Common\S7SDD\s7oppilx.inf 
	search for old INF-Files with HwId *SIEA040 
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7oppilx.inf
Install C:\Siemens\Common\S7SDD\s7os41px.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_403A&SUBSYS_403B110A&REV_01 
	Device PCI\VEN_110A&DEV_403A&SUBSYS_403B110A&REV_01  is not currently attached to the computer
	give installation some time 
	install next device --------------------
	search for old INF-Files with HwId PCI\VEN_110A&DEV_403A&SUBSYS_403C110A&REV_01 
	Device PCI\VEN_110A&DEV_403A&SUBSYS_403C110A&REV_01  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7os41px.inf
Install C:\Siemens\Common\S7SDD\s7os41xx.inf 
	search for old INF-Files with HwId PCI\VEN_110A&DEV_4009&SUBSYS_4006110A&REV_01 
	Device PCI\VEN_110A&DEV_4009&SUBSYS_4006110A&REV_01  is not currently attached to the computer
	give installation some time 
	install next device --------------------
	search for old INF-Files with HwId PCI\VEN_110A&DEV_4009&SUBSYS_4008110A&REV_01 
	Device PCI\VEN_110A&DEV_4009&SUBSYS_4008110A&REV_01  is not currently attached to the computer
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7os41xx.inf
Install C:\Siemens\Common\S7SDD\s7oserix.inf 
	search for old INF-Files with HwId *SIEA042 
pre 	successful pre-installed C:\Siemens\Common\S7SDD\s7oserix.inf
Install C:\Siemens\Common\S7SDD\s7osobux.inf 
	search for old INF-Files with HwId Root\SoftBus 
	Uninstall old INF-File s7osobux.inf 
	Uninstall old INF-File oem42.inf 
ok 	Root\SoftBus successful installed 
[2007-01-03 14:50:04,343]
================================================================================
S7SDD was successfull installed
    Successfully started C:\Siemens\Common\S7SDD\s7osuasx.exe -i, Returnvalue: 1
 
    Shall start sndeloem.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sndeloem.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\sndeloem.exe

start CreateProcess  [14:50:06]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\sndeloem.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sntinstp.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\SNTINSTP.EXE

start CreateProcess  [14:50:08]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\SNTINSTP.EXE -e Siem_ISOTrans, Returnvalue: 1
 
    Shall start sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    ChangeDirectory to C:\Siemens\Common\S7IEPG\CP1612 for sn_cp1612.exe in C:\Siemens\Common\S7IEPG\CP1612\
    Start Application: C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe

start CreateProcess  [14:50:10]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Siemens\Common\S7IEPG\CP1612\sn_cp1612.exe , Returnvalue: 0
 
    Shall start sntinstp.exe in C:\WINDOWS\system32\
    ChangeDirectory to C:\WINDOWS\system32 for sntinstp.exe in C:\WINDOWS\system32\
    Start Application: C:\WINDOWS\system32\SNTINSTP.EXE

start CreateProcess  [14:50:12]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\SNTINSTP.EXE -e s7snsrtx, Returnvalue: 1
 
    Shall start S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    ChangeDirectory to C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin for S7TraceServiceX.exe in C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\
    Start Application silent: C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe

start CreateProcess  [14:50:14]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\Archivos de programa\Archivos comunes\Siemens\Automation\TraceEngine\bin\S7TraceServiceX.exe -service, Returnvalue: 0
 
    Shall start SC.EXE in C:\WINDOWS\system32\
    Start Application silent: C:\WINDOWS\system32\sc.exe

start CreateProcess  [14:50:16]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\sc.exe config S7TraceServiceX start= auto, Returnvalue: 0
 
    Shall start NET.EXE in C:\WINDOWS\system32\
    Start Application silent: C:\WINDOWS\system32\net.exe

start CreateProcess  [14:50:18]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\net.exe START S7TraceServiceX, Returnvalue: 0
 
    Shall start reg.exe in C:\WINDOWS\system32\
    Start Application silent: C:\WINDOWS\system32\reg.exe

start CreateProcess  [14:50:22]
    Default TIMEOUT value was changed to 20 minutes
    Successfully started C:\WINDOWS\system32\reg.exe FLAGS HKLM\Software\Siemens\Sinec SET DONT_VIRTUALIZE DONT_SILENT_FAIL, Returnvalue: 1
 
END  StartApplAfter

    The INI-File forces reboot.

    Add Client:                     SIMATIC NET PC SOFTWARE2
    Write Version:                  8.0
    Write Release:                  K08.00.04.00_01.02.00.03
    Display Name                    SIMATIC Device Drivers
    Logfilename                     C:\WINDOWS\S7DOS_LOG.TXT
Result parameters in registry:
    Write ComponentEntry:           S7DOS
    Write Restart:                  1
    Write Logfilename:              C:\WINDOWS\S7DOS_LOG.TXT
    Write returncode first step:    1
    IScript code finished.
CA: Comp_AfterDataMove  END 14:50:24

CA: IniC_DeleteIniFiles  START 14:50:24
    Delete Ini file: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\properties.ini
CA: IniC_DeleteIniFiles  END 14:50:24
    The temp. directory is: C:\DOCUME~1\ww\CONFIG~1\Temp\{CCC01ADD-3A54-11D6-92A8-00A0245B3AC6}\

Log File Closed (first step);;;;; 1-3-2007, 14:50:24 ;;;;;;

End CreateProcess  return=0  [14:50:25] 

================================================================================
 MSI returncode = 0   (0 = OK)
 Appresult value= 1   (1 would be OK)
 SetupSucceeded Value= 1  (1 or 2 would be OK)
 Client entry set empty - compsetup finished.
    Add saved Client PC Adapter USB_{327335CE-EDD9-452A-8BC3-32C44E3A9C90}
 'setup.exe' finished.
======= Timestamp logfile end: 2007-01-03,  14:50:25
================================================================================
=================================== END ========================================
 
 
================================================================================
[2007-01-03 14:51:57,250]
S7SDD Setup Application - Installation

================================================================================

Logfile created/appended by setup-caller 'adscompsx.dll' ...
Installation skipped without starting Windows Installer: Only new client entries will be noted. OK.
